Tuesday, October 6, 2020

Changing Qlogic Queue Depth Windows

 The maximum SCSI queue depth value, as determined by the Microsoft port driver developer, is 254. QLogic sets the default value to 32. The Microsoft storport.sys driver has total control of the depth of the device queue; QLogic Miniport merely sets the value using the predefined Storport interface call and procedure as determined by Microsoft.

 
Use the following procedure to change the queue depth parameter:
 
1. Click

Start, select Run, and open the REGEDIT/REGEDT32 program.

2. Select

HKEY_LOCAL_MACHINE and follow the tree structure down to the QLogic driver as follows:
HKEY_LOCAL_MACHINE
SYSTEM
CurrentControlSet
Services
ql2300
Parameters
Device

3. Double-click DriverParameter to edit the string, for example:

DriverParameter REG_SZ qd=32

4. Add "qd=" to the "Value data:" field. If the string "qd=" does not exist, append it to end of the string with a semicolon, for example:

;qd=<value>

5. Enter a value up to 254 (0xFE).

The default value is 32 (0x20).

6. Click OK.
7. Exit the Registry Editor, then shutdown and reboot the system.

No comments:

How to use DiskSpd to simulate Veeam Backup & Replication disk actions

This HOW-TO contains information on how to use Microsoft© DiskSpd to simulate Veeam Backup & Replication disk actions to measure disk pe...